Grand Quattro Not getting boot

Hi Friends

Yesterday, I have rooted my phone and installed Supersu in the phone and installed Xposed Installer, While completing Xposed Installer process it was asking for reboot and i have clicked on reboot after that its not getting on.

Can someone please help me how can i boot it

TIA

from xda-developers http://ift.tt/1P6Sa2v
via IFTTT

Stop Update in Recovery Mode? SM-G870A - 4.4.2

Backstory:

I have spent best part of the day trying to resolve this update issue and lo and behold the past 3 hours before posting this I've been searching everywhere how to get around this.
My phone which I have only just fixed up (screen smashed back in May of this year) I had the phone in airplane mode when I smashed the phone with a swipe lock on digitizer was shot so no way to unlock device. The unit was until right now in pristine 4.4.2 condition. :D

Story:
I have been the last couple of days researching and trying to root, custom rom the device. Not being fluent in what I'm doing it has taken me a long time, but I was pleased to say I got rooted and have flashroot and SuperSU installed and felt I was moving forward. With that, it felt like a good days work was done and this afternoon I powered down the unit. :D

I had during/previously disabled the system update pending but to my surprise, some time later this afternoon, with the device powered down, the unit booted up and was installing at 25% by the time I noticed of said unwanted update. I ripped out the battery and saved myself an irksome update.

Facts surrounding the phone prior to this: I had left the phone in Wifi mode without a SIM while I rooted the device.

I'm now stuck with a device that will only boot in Recovery Mode straight to 25% of the update or boot it into Odin Mode. The good news is the device was rooted. I have nothing precious on the device so I'm happy to flash the device from here but I'm still not clear what steps I need to do from where I am. Would I need to install a new bootloader?

I am unbiased about which custom ROM to use, but from my days trawling these threads the ones that seems most straight forward either been closed/superseded, or have been replaced by something else that doesn't support my device or are offering me more bling than I care for. Could someone point me where to go from here?

Before replying please take time and consider people like me who have spent hours trying to find articles that aren't time wasters so many great articles are sabotaged by tonnes of junky replies and trolly comments about "read the FAQ" or pointing to obnoxious links to unrelated or out of date threads.

from xda-developers http://ift.tt/1P6g4JB
via IFTTT

Help rooted but cant gain access on some apps!!!!!

I rooted my Micromax Bolt q324with kingoroot pc software successfully but after a few days i cant able to get root access for some apps like when i install a new root app it asks me for permission then i tap grant but the app shows unable to gain root access. how to fix this issue i tried flashing my phone with stock ROM then again rooting it with kingoroot but again no luck i was unable to gain root access for some apps but when i check root access with root checker it says root access properly installed and i can go to terminal with root access but when i try to mount system as rw it shows ''Mount: operation not permiited" how to fix this issue!!!

And yes the phone is a spreadtrum sc7731 chipset device so the rom file is in .pac format but i figured that how to flash it.So i am willing to install a Custom ROM if you provide me the link of it.......

from xda-developers http://ift.tt/1P6g4Jx
via IFTTT

Help With possible soft Brick, Samsung galaxy S4, SCH-I545

I recently tried to flash a rom that was rooted using Odin. Odin eneded with Fail!(Auth) it was a 4.4.2 which is the version of android I am still running. I have installed a rooted Rom in the past, sadly I undid it to make the fatal mistake of going from 4.2.2 to 4.4. Any ways, the phone is now stuck in the download processes and when i try to flash any roms it fails. Kies fails to reconize it for recovery, but Heimdall will, and so will odin. I could really use help.

from xda-developers http://ift.tt/1P6Scr6
via IFTTT

Can't unlock the phone after upgrading to Marshmallow from Lollipop

Need some help guys,
I just manually flashed an upgrade from Lollipop to Marshmallow MRA58K on my project fi phone. I had a pattern unlock set up on my phone. When I put in the pattern nothing happens. The background goes back to the lock screen with the time and notifications hidden. Phone does not even tell me if my pattern is incorrect. Nothing happens!

I guess I can factory reset the phone but I want to avoid that if possible. I tried locking the phone using Android device manager to replace the lock screen, but it won't let me replace the lock screen because there is a lock screen already set up on my phone.

Any ideas?? If I can avoid a factory reset that would be best!

from xda-developers http://ift.tt/1P6ScqY
via IFTTT

Moto G2 Indian Version, Failed to validate system image

Hi,

I tried installing(downgrading) KitKat in my Moto G2 from CynogenMod 12.1
I have tried KitKat and Lollipop both but every time I get same error.
"Failed to validate system Image"

I locked bootloader I guess the last time I flashed Lollipop 5.0.2
Phone shows Device is Locked. Status Code:2

Can someone guide what I need to do? As every time I try to do a Powerup, it takes me to fastboot mode with above mentioned error message.

TIA :)

from xda-developers http://ift.tt/1P6S9ve
via IFTTT

Safe to go back to 5.1 after flashing the 6.0 Brazil update?

Is it safe and as simple as flashing that list of fastboot commands I.e. fastboot flash sparsechunk 1, 2, etc. I'd rather go back to 5.1 and take the ota once it comes. Safe to do? Thanks

from xda-developers http://ift.tt/1P6S9eG
via IFTTT

[MOD] Theme you xperia M Stock Rom via Xposed installer

Hi friends
are you bored of your Stock rom UI ..?
So here's a new themes and mods where you can easily customize your Stock rom with some nice xposed modules
I Know its not new i mean its already there but i just want to make you feel good in using it for who doesnt have a idea about this

Lets start

Before installing it make sure to backup your current data and everything with a recovery. It is recommended because some modules gonna overrides system defaults so incase if you want to revert back to stock experiance for that u must backup your rom/ if not also not a problem u can flash stock firmware and can get back your stock experiance

1. Download and install xposed installer
here is the video how to install it

2. Now its time for to download modules , open xposed installer there u will see a list of profiles containing framework,modules,download,settings etc.. you just need to hit download and search for modules there

3. Some of the recommended modules for customization
--->Android theme engine (to theme your status and navigation bars icons,colors etc..,)
--->AppOpsXposed (to manage permissions for apps installed in your phone like restricting apps to use your contacts,location,sd card access etc...,)
--->Gem Xperia Xposed (to theme your xperia launcher, system ui )
---> Gravity box
--->Serajir Xperia Xposed
--->Xblast tools
--->Xstana (to change your status and navigation bar icons)
--->Youtube Adway (to block ads in youtube while streaming)

and to theme your launcher follow this guide

Sorry for not detailing about how to use mods but not a problem u can find easily videos on youtube
and its just a little brain work if you know how to use one mod and you can easily know how to use the other mods

IF you have any doubts pls feel free to post you comments

Attached Thumbnails

         

from xda-developers http://ift.tt/1P6S8HP
via IFTTT

[HELP] DIY battery

Let me preface this by saying this is my fist time posting here so if I screw something up, tell me and I'll fix it but I've gotten a lot of good information here about coding and other things so I'm going see if someone could help me over a little road block I've met in my current project. I am not a great electrician.

I'm trying to build a portable battery that will charge all my devices. I want it to have a common port to charge from, be lightweight, and relatively cheap (under $100). The two main devices I want to charge are my phone and my chromebook (power specs to follow).

Phone: Nexus 6p
usb type C
charger in box does wall (US) to 5 volt, 3.1 amp
3.1 Ah battery

Chromebook: acer c710
proprietary connector
power adapter does wall to 19 volt, 2.15 amp
2.2 Ah battery

Here's what I have so far. I was thinking of a usb type c input jack. The three power lines on it would be converted to 19.2 volt then stored in a drill battery. The drill battery could then be brought down to the 19 volt for a direct connection to the chromebook on one port and brought down to the different voltages for a type c port.

Here's why I cose these parts:
The types c input jack would be about to charge from a standard usb a wall plug with a cheap adapter and charge the battery, just slowly. If I get a charger for home that has a faster charge rate I could get really, really fast rates because of the type c 20 volt line when chargers for 100 watt type c come out.

the drill battery seems like a cheaper option than anything else plus the 19.2 volt storage would mean much less converting. I don't need a huge battery as you can see by the sizes of the devices' batteries I intend to charge. I can see there being a much better option here that I missed.

I chose the direct 19 volt out because it seemed easier that going to a 120 volt ac wall plug then back down (again I could see myself being wrong here).

lastly I chose a type c out basically for the same reason I chose it as the input jack. I can be made to charge and usb device with a cheap adapter. I'm not against a type c port and a type a port if that is easier or so easy that I just should.

anywhere you see something in this plan that could be done cheaper/better point it out. If nothing is wrong with this then all I need to ask is how do I wire a type c port with the different voltages?

from xda-developers http://ift.tt/1P6S8aH
via IFTTT

Custom software "back" button keeps reseting

Hello there everyone!
This is my first time posting, but have been using xda for awhile now as this community is amazing with all the work everyone puts in and the beautiful work they do!

So to get to the point. Ive been working on setting up the NERV Evangelion theme for my nexus 7 being a huge fan of the anime and love the look and functionality of the skin.

Upon setting this up, theres a choice to change the software buttons on the nexus 7 from the normal white 'back, home, and recent' buttons to custom ones that are orange to match the theme and also change the way they look.

I have it rooted and running AOKP with Nova launcher. and within the AOKP settings it allows me to add/change/move the software keys at will as well as change the icons etc. which is great, and works great! however after changing the button icons, as soon as i put it to sleep or the screen turns off, the custom back button icon changes back to the stock one whilst the others stay.

If i go back to change it back to the custom, it does it fine, but then as soon as the screen sleeps, again it changes no matter what. even if i have it in a different position...

So anyone have any ideas on this? no idea whats goin on, and cannot find anything on this subject and would appreciate the help a bunch, thanks!

from xda-developers http://ift.tt/1P6g105
via IFTTT

Adaptive brightness

So my adaptive brightness keeps turning off on its own. I have no idea why. Anyone having this issue? Would love a fix for it.

from xda-developers http://ift.tt/1P6g2kJ
via IFTTT

Suddenly non-functioning data connection on Sprint (Ting) LG G2

I'm running EuphoriaOS (Euphoria-OS-1.1-ls980-OFFICIAL-20150622), which is a custom Lollipop rom. It's been working ok so far up until a few days ago, when my data connection just suddenly broke. Granted, the 4G/LTE wasn't functional before either, but I use wifi a lot and 3G is tolerable. But now I get nothing. Texting and calling are fine, though. I've had to mess with flashing APNs separately to get any cellular functionality before, but reflashing that to fix this new issue hasn't worked. I've googled how to fix this for hours, and I've tried pretty much every "fix" out on the internets. Still... nothing works. When I try to add APNs through the phone settings menu, it says "APN settings are not available for this user." I can tap the 3-dot icon and add the APNs and then tap Save, but the new APNs (or any existing APNs in system\etc\apns-conf.xml) are visible in the APNs settings menu. I tried resetting to default. I tried wiping cache. Tried reflashing the rom. You name it, I tried it. I guess the only thing left is to flash a stock rom and update prl and whatnot. That's a ton of hassle, and I don't even know if that'll work. I could only find stock kitkat roms too... would fixing data on a KK stock rom even do anything?

Help! Thanks in advance!

from xda-developers http://ift.tt/1P6S4YB
via IFTTT

Lenovo K4 Note first news with fingerprint scanner.

Lenovo has released the new that it will launch Lenovo K4 Note since last successor , Lenovo K3 note. Most users are very satisfied with the news. Because Lenovo k3 note is a really good one for most customers. However, what will you expect from Lenovo k4 note?
It is said it will have Helio X10 chipset.
The K4 Note is expected to launch in India (at least), with other markets to follow. The first launch will take place in January 2016.
So will this smartphone be popular like Lenovo K3 Note? And will it be with fingerprint scanner?

from xda-developers http://ift.tt/1T0JLga
via IFTTT

Battery Life?

Hi I came from Xperia T2 Ultra usually get around 8-10 hrs sreen.on time with lowest brightness, no auto sync, stamina mode on + queue background, browsing all the time, playing some games around 10-30 min Aspahlt 8, no location on no scanning.wifi.even.when.off, watching youtube with 80%-100% sound @360-720p with facebook or facebook lite turn on sometimes, wifi on all the times and mobile network set ti gsm only. Is this possible with Xperia Z2? Or even.greater with the same.usage? I usually get 1 hr + screen.on time with 10% depleting on my battery so estimate is 1hr+ scrren.on time = 10% battery depletion. Thanks, sorry for bad English. I really like Z2 so maybe its better than Z3. Right now I'm on 75% Battery with 3 hrs and 13 seconds screen on time I did not play Asphalt 8 at this day yet.

from xda-developers http://ift.tt/1T0JJVm
via IFTTT

"Unfortunately package installer stopped working" in app permission

On clicking the app permission I get this? Bug????? Or just me [emoji22]..
I m on marshmallow 6.0.1 stock
Attachment 3578040

Sent from my Nexus 6 using Tapatalk

Attached Thumbnails

 

from xda-developers http://ift.tt/1T0JLg6
via IFTTT

i9205 running cm13

Just checking if any other members has tried cm13. I've been using for 2 days and I'm planning to stick with it.



Sent from my GT-I9205 using Tapatalk

from xda-developers http://ift.tt/1T0JLg4
via IFTTT

Fitted Kitchens For Sale In Glasgow Area UK

Fitted Kitchens For Sale In Glasgow Area UK. Thirty Ex Display Kitchens To Clear. w'w'w'e'x'd'i's'p'l'a'y'k'i't'c'h'e'n's'1'c'o'u'k £ 595 Each with appliances.Tel 01616-694786

from xda-developers http://ift.tt/1Yfr1QE
via IFTTT

Help my tablet has reversed its role from being charged to being a powerbank!!!!!

Help me my tablet has lossen its charge last night but then charged it overnight it charged but won't turn on I tried charging it but it wont turn on so i tried many angles and it show a battery icon charging however its the opposite the charger has two cable the other is connected to the other tablet so the chargers light has been turned off and when i removed the charger from the socket its light came back and the other tablet charged i dunno why but it seems that my unknown problem tablet is giving electricity to the charger to the other tablet which is weird and when i put back the charger to the socket the lights goes off and the other tablet won't charged probably cause of the different flow of electricity helpppp!!!! Need an expert!!!!!:(

from xda-developers http://ift.tt/1m63EaK
via IFTTT

Can not find accessories options in settings for s view cover?

as title says, can not the accessories option in settings menus to turn my s view cover on?!
i have N920C 5.1.1 stock with no root

Sent from my SM-N920C using Tapatalk

from xda-developers http://ift.tt/1YfqVIR
via IFTTT

Is it possible for GS6 international roms to work on Sprint GS6?

Like if I take the modem of the Sprint GS6 and the Kernel and add them to the rom of the international version, would it work?

I'm very sorry for the nooby question, I'm just trying to learn a few things.

from xda-developers http://ift.tt/1YfqUV7
via IFTTT

No mms on 6.0 or 6.0.1

OK Nexus 5x users. I have searched the web, I've searched the forum, I've searched everywhere I possibly can think of and still can't find a solution. I am on AT&T. I had an iPhone 6s before I bought my Nexus 5x, But from day one I'm not able to receive MMS messages consistently. Everything over 160 characters I don't get. I've tried everything I possibly can find, to no avail. I've messed with APN's, I don't have push bullet installed, I don't have any other text messaging app installed. I still have my iPhone 6s, and I've gone in and disabled face time as well as iMessage and iCloud, so on and so on and so on. I've even tried multiple text messaging apps just to see if that would help. I've installed two different operating systems, however both of them are based on 6.0 .1. For what ever reason no matter what I try no matter what I mess with I can't get any text message that are 161 characters or more to come through. When I reset phone to stock, I can get them to come through for about one minute and then I no longer can get them. I don't install any other apps and they just stop coming through. If I put my Sim card back in the iPhone 6s and make a few texts and then disable iMessage and FaceTime and iCloud again, I can get MMS messages for about one minute and then they stop coming through again. I can send MMS messages just fine I just can't receive them. I see multiple posts on the Internet about this issue with marshmallow. It seems like everybody is able to solve it, "but me". Does anybody on this forum have any idea what I can do to solve this issue?


Sent from my iPhone using Tapatalk

from xda-developers http://ift.tt/1YfnEJu
via IFTTT

NEXUS 5 MELLOW-HAMMERHEADrom

Coming Soon !!!!! Come join in. :good:
http://ift.tt/1Ovp346.

from xda-developers http://ift.tt/1I7R3OG
via IFTTT

[ROM] [N910PVPS4COK1] [100% Stock, Root, Odexed&Deodexed, No KNOX/Itson] [12/15/2015]

Once again I bring to you two completely stock builds of Android TW-Lollipop 5.1.1 (N910PVPS4COK1) for the Sprint Samsung Galaxy Note 4.. Both ROMs are built from the official Samsung tar ball. The ROM will self root upon flash and it has init.d/busybox support. Knox and Sprint Itson has been removed. Both ROMs are completely stock with all of the original factory installed apps. Available in odexed and deodexed. Both ROMs are identical other than one being odexed and the other deodexed. Also included in both ROMs in this thread is the stock OK1 modem and APN patch to ensure you have the latest modem & APN's from the latest OK1 software.

Other than the removal of Knox and Sprint Itson, these roms are 100% stock in every other way. They are stock and will stay that way. Please don't ask for mods, changes, etc in this thread. These roms are intended for those people who want the stock roms in their original form with the addition of root and removal of Knox & itson, as well as other members who need a good solid base for their rom projects. I give permission for other dev's to use this rom as your base ONLY if you contact me prior to using it. If I find users using my work without proper credits I will report you and make you look like a fool I promise. Do the right thing and give credits to people for their time and work. It's a curtesy and respect thing nothing more. With that said, I highly recommend other rom chef's/dev's to use this base rom because it is bug-free and built from the official Samsung tar ball. Last but not least, if you appreciate my work please press that Thanks button, rate this thread and consider a kind donation! Enjoy!

Important Notes: Before flashing ANY Lollipop 5.1.1 TW-based ROM, including this one, you MUST first do one of the following:
1. Take the Lollipop OK1 ota update on your phone. (Start by being on the stock unrooted OJ6 rom then take the OK1 ota update)
2. Odin flash the stock OK1 rom tar using odin on your PC.

Once you have correctly updated your Note 4 to Lollipop 5.1.1, software version N910PVPS4COK1 DO NOT... I repeat, DO NOT attempt to root your phone with CF-auto root or other methods. It will soft brick your phone. Instead, you ONLY need to flash the latest TWRP recovery using odin on your pc. Nothing else. The ROM zip will pre-root your phone as well as flash the stock root-permissive OK1 kernel by @freeza

If you are still on any KK or Lollipop 5.0 TW-based ROM such as NIE, OB7, OE1 , OF5 or OB7 (including any KK AOSP/CM-based roms) then you MUST first update to Lollipop 5.1.1 OK1 by one of the two methods I mentioned above BEFORE flashing this ROM. Failure to properly update your device partitions to 5.1.1 OK1 firmware absolutely WILL cause problems. You have been warned. Please don't ask for help if you did not follow my simple instructions and warnings.

Flashing instructions: ***Before beginning the flash/setup process MAKE SURE your battery has at least 50% charge and/or connected to the charger!!!***

1. Backup anything you don't want to lose off your internal and external storage to another location just to be safe.

2. Download the rom using your pc. (downloading with your phone has a much higher risk of file corruption. Not recommended with large files).

3. VERIFY the MD5!!! Once the download has finished, compare the androidfilehost MD5 using a MD5 tool on your pc. (Google "md5 checksum windows") for a good MD5 tool for your pc.

4. Put the downloaded rom onto your internal storage or external micro sd card.

5. With phone powered off, reboot into recovery by pressing and holding volume up, power and the home button until you see the Samsung logo then release all buttons.

6. Once in recovery choose the wipe button and do a factory reset three times. Optional but recommended is to wipe "Data". This will wipe all of your user data such as google accounts so MAKE SURE you backed up first like I said in step #1 above! Next go to "advanced wipe" and select all of the partitions EXCEPT micro-sd card and internal storage. Internal storage is optional but recommended when first updating to a major software revision such as 4.3 to 4.4 or 5.0.1 to 5.1.1. The reason is to remove left-over data from previous version of Android and start with a clean slate.

7. Choose the "Install" option and select the rom "Sprint_Stock_N910PVPS4COK1_xxx" from either your internal or external micro-sd card. It will flash the rom and give a confirmation once completed.

8. Press "Reboot" then "reboot system". You should get no prompts or warnings about not having root. If you get a warning about not having root ignore it and DO NOT allow TWRP to apply root.

9. Initial rom "optimization" will take several minutes for the deodexed rom while ART builds its cache (the odexed rom takes much less time for first boot). The phone will remain on the yellow Sprint Spark screen for about 10 -13 minutes during this time. Let the phone optimize for at least 13 minutes (for the deodexed rom) and the screen will eventually turn off or show the setup wizard once it finishes. When the screen turns off, simply turn it on and proceed to setup your phone.

10. Once finished with the setup wizard, wait a few moments and the phone will automatically install the Sprint apps. You must either "accept" or "disagree" with each and every google prompt for these apps or else the installs pause until you do so.. Also you will be prompted for the "connections optimizer". Quickly set it to what you want and close it. That's it! You're done!

flashing anything on your device is done at your own risk. There is no way myself or any other developer can guarantee that flashing this ROM or any other file will not brick your device or otherwise cause some other type of damage. This is just a standard warning. I am not responsible for anything that you do to your device. However, all of my roms, mods, etc are pre tested by myself and other testers prior to public release.

Sprint_Stock_N910PVPS4COK1_Odexed

Odexed rom currently uploading...

Sprint_Stock_N910PVPS4COK1_Deodexed

XDA:DevDB Information
Stock-Rooted-N910PVPS4COK1, ROM for the Sprint Samsung Galaxy Note 4

Contributors
tx_dbs_tx
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: N910PVPS4COK1
Based On: SPR-N910PVPS4COK1-20151209172046

Version Information
Status: Stable
Stable Release Date: 2015-12-15

Created 2015-12-16
Last Updated 2015-12-15

from xda-developers http://ift.tt/1m5YjjL
via IFTTT

Pulling /system via ADB doesn't pull WLAN/Wi-Fi modules.

Going to try and make this short and adequately detailed:

I've not worked on or directly tampered with ROMs for about 2 years (though I did with individual apps) now and when I felt like working an OxygenOS optimized & stripped 'base ROM' (with GApps, Swiftkey etc. properly exterminated from the ROM) to allow other devs (and myself) to make ROMs on top of (lack of OOS based ROMs makes me sad, even if CM is seen by most as superior). I have figured out a problem which has never occurred to me before in any of my devices or the experience I had a while ago.

I find that when I pull /system from the stock or modified stock OxygenOS ROM that WLAN/WiFi modules aren't being properly pulled for me. This is true for me both if I am pulling with the OS properly booted and functioning or if I am pulling when being and recovery.

This is a problem because I have to add them manually each time around I pull /system from my device to the dump which simply is inconvenient and wastes time for me.

Of course my other alternative is to take a nandroid and extract from nandroid but I don't know how to decompress backups made with TWRP 2.8+ with Windows (normally I'd run a unixlike system for work but I had to temporarily move Arch off my USB drive which I needed for an OS installation onto another system). (The ext4 backups don't open in the tools I traditionally used.)

(In case you are asking, I am running adbd as root in order to do the operations, I won't forget that after such a while.)

Oh and by the way, the ROM base itself otherwise once the missing libs are added runs fine, I've tested it already. I've still to zipalign my apps and optimize the images (JPGs & PNGs) inside the system apps as well as add some of my battery optimisations into the ROM (w/ default kernel config --> I'm shipping Boeffla w/ its config app given all other kernels are dead ATM, also shipping the SD810 tweaks). SuperSU, busybox and other common tools are obviously already integrated. In fact I'm posting from it right now though I'm in a rush typing this up because the frustration I had (trying to figure out why WLAN wasn't initially working and then not figuring out why the modules weren't pulling) has now reduced me to 4h of sleep :/.

Sent from my ONE A2003 using Tapatalk

from xda-developers http://ift.tt/1YfnEJo
via IFTTT

Bricked Nexus 6? TeamWin image keeps flashing

So a while ago, I rooted my nexus 6 phone and along with it TWRP. So, today, I tried unrooting it, and in the process of doing this, I didn't notice something failed and after this, I locked the OEM, so now I can't unlock it. After doing this, my phone starts to boot, and the image for TeamWin Just keeps flashing, and when I try to go to recovery mode from the fastboot, it just tries to go to teamwin and the image for it just keep flashing as well. I have no idea what to do and I am really panicking. Could anyone please direct me to something that could fix this? I am limited in my knowledge involving fastboot and flashing custom ROM's so I need specific steps as to what to do. I really need help.

*Also, when I mean the image for teamwin keeps flashing, I mean the literal picture of the teamwin bootup keeps flashing on screen and nothing happens.

from xda-developers http://ift.tt/1m5YlrJ
via IFTTT

Help with 'This Device was reset. Sign in with a Google account....

I sold a moto x 2nd edition online that I hard reset. The buyer is now saying that he needs my credentials to continue setting up the phone. This is part of the anti theft security Google has implemented. The screen says "This device was reset. To continue, sign in with a Google account that was previously synced on this device.".
Is there any way for me to fix this for him without giving him my email and password?
I tried android device manager online but nothing helps.
(Mods, if my post is in the wrong section, please move it.Thank you).

Thanks!

Sent from my XT1528 using Tapatalk

from xda-developers http://ift.tt/1YfnFND
via IFTTT

[PLK-L01]Problem with update B121 firmware because my build number is B636 :(

Today, I'm having a problem with device. I tried to update my honor 7 (PLK-L01) to B121 firmware but FAILED. :crying: After, I see my build number is PLK-L01 B636 B210. I found many firmware but their build are PLK-L01 C432 B211 , so I can't update it
Is there any ways to update my firmware? :confused:
Thanks for helping!

from xda-developers http://ift.tt/1m5YlrD
via IFTTT

OTA 6.0.1 update, how to install?

I'm rooted and on stock rom, when I tap install update it reboots into TWRP and then doesn't install. How do I update?

from xda-developers http://ift.tt/1m5Ylbn
via IFTTT

[GAME][3.1+]"Birth of the Empires" (BotE)

Birth of the Empires (also known as BotE) is a turn-based 4X strategy game set in space in the style of classics such as "Microprose: Master of Orion 2" or "ST: Birth of the Federation". By choosing one of six major races aim is to gain control and supremacy over a part of the galaxy, either by diplomatic or military means. Further victory conditions are available at game start.
Earth, 2121: Spaceflight coming nearer and the third world war was long in the past, the future looks bright again for mankind. The whole universe with all its fascinating worlds, lifeforms, species and anomalies lies ahead of each brave man and woman aboard their starships eager to find new life, a new home and contact to whatever civilization there may be outside Earth system, to explore the unexplored, to encounter the unencountered.

Take command of one race during the beginning stages of their empire, but beware, there is more than one way leading to victory and each time, mastering it will be different. It will likely change and you are challenged to keep the balance within the galaxy quadrant or seize galactic power for your race and thereby establish your own "balance" in the galaxy!

Game is available on Google Play.

from xda-developers http://ift.tt/1YfnEsX
via IFTTT

Best kernel for stock cm 12.1?

Which is the best kernel in terms of performance .
I am currently on stock rom build number: lmy48b

Sent from my A0001 using Tapatalk

from xda-developers http://ift.tt/1P6Idlq
via IFTTT

help home button no working

ok I have flashed two marshmallow roms and both of them the home button dosnt work anyone tell me what I'm doing wrong

from xda-developers http://ift.tt/1UwRSSG
via IFTTT

CT972 (standard chinese tablet) Flashing A ROM

Hi everyone!

So I wanted to do some quick testing, and I tried to install a custom ROM on this chinese tablet I found laying around. I was successful in rooting it, but then while trying to unlock the bootloader I failed. After some research it appeared that this tablet doesn't have a recovery image.. I found this kind of weird but this proved to be true as I booted in fastboot mode, bootloader mode, and even recovery mode but to no avail the normal restart just occurred. So at this point I don't know what to do, I have ADB, fastboot but none seem to work.

Can someone please provide guidance on how to proceed with this issue?

CT972 Dual Vanilla
Android 4.1.1
Kernel version: 3.0.8+
Build number: RK30_ANDROID4.1.1-SDK-v1.00.00
CT972 Dual Vanilla.20121112.113857

from xda-developers http://ift.tt/1P6Ibdo
via IFTTT

Tasker and Heads up and Auto answer of calls

Hi I was wondering if there is a way to setup a tasker task to turn off heads up notifications. I'd like to turn it off based on a variable.

Also I used to use auto answer calls via tasker and apparently that isn't supported on the 6P. Does anyone know of another app or workaround to auto answer calls. Or would a update to tasker bring it back? I use it while I'm driving.

Sent from my Nexus 6P using Tapatalk

from xda-developers http://ift.tt/1UwRSSE
via IFTTT

LS9980 - CyanogenMod 12.1-20151114-NIGHTLY-ls990 - Long boot times, screen divided

Okay so I am running CyanogenMod 12.1-20151114-NIGHTLY-ls9980 on my lg g3 ls9980 and it seems it takes a very long time to boot up if my phone dies, etc. Then, when my phone finally turns on, it goes to optimizing apps, all 171 of my apps have to get optimized each time... Sometimes this isn't the case but most of the times it is... Then to add to this, when booting my phone on, the pixels are perfectly slashed straight down the middle, one side of the screen being higher than the other ( i believe it's left over right)... this is on everything, including the CyanogenMod boot logo, but not the LG logo that I get before the CyanogenMod logo shows. In order to get this screen slashing to go away, I have to lock and unlock my phone about 3-4 times...

How do I fix all of this?

from xda-developers http://ift.tt/1UwRVOe
via IFTTT

Play Store Doesn't Work

Hello everybody I had an issue, I updated my Lg from KK 4.4.2 to Lollipop 5.0.2 via OTA, but when it finished my google play doesn't open, there's a message saying "You need to update my google play services, google play services won't open until you update google play services" also the games can't open or work well.... What can I do about this problem?

Attached Thumbnails

 

from xda-developers http://ift.tt/1P6Id56
via IFTTT

Screwed up cache partition

I was trying to update CM12 on my Fire, and per instructions went to do a factory reset from TWRP. It sat on formatting /cache for a long time, and so being the idiot that I am I decided to press buttons. It rebooted, and now I can't factory reset, wipe anything, or install anything because nothing can mount the /cache partition. How can I fix this?

from xda-developers http://ift.tt/1Yj2Knn
via IFTTT

Best/easiest way to root/flash roms?

Waiting on my new t-mo g3. Been reading about how to get some custom roms on the device. Im using a linux pc. Looks like following these 2 threads will root and install twrp. This looks like the easiest way, can someone confirm?

http://ift.tt/1Gv2aNF
http://ift.tt/1BSe4hZ

from xda-developers http://ift.tt/1RQP5UP
via IFTTT

changing from sprint firmware to att software

hi, i got my lg g3 at&t from my cousin upstate and i was trying to get some apps running on it and it most of them werent really functioning well because my playstore couldnt connect with google through mobile data and facebook app was doing the same so i decided to download the stock firmware for the phone. the phone used to start up as sprint so i download the sprint stock kitkat firmware and used lg flash tool to change it back to stock firmware. Then the network stopped working so decided to do background check and found that it was actually at&t version.

Long and short of it all is that i tried putting the stock at&t kitkat firmware on it using lg flash tool and always outputs download failed( mismatch device and firmware ). can anyone help with this.
i read on some forum that theres a universal dll that can with all versions for Lg G2 and was wondering if theres one for this one too
pls help i really need it to work

from xda-developers http://ift.tt/1RQP838
via IFTTT

Can't find any gps satellites

Hi , first off all , sorry for my english, is not my native language so it is possible that i commit some mistakes
if this matter, my rom b839 lollipop
So , my p7 can not find/detect any gps satellites
a week ago i could do this , and used the gps without any problemas , but today i wanted to use the gps and it cannot find any satellites
THe phone didn't get any major change , update , fall (never had) since the last time i used.
I already downloaded like 5/6 gps apps and not even 1 find one satellite
I think this is very strange, hope that is not hardware , and would like to reset the phone.
If anyone expercienced this , help.
Thanks a lot for your reading. Stay good

from xda-developers http://ift.tt/1Yj2HIp
via IFTTT

hboot question

Hey guys,

Quick question, I'm S-off with Sunshine since forever ago. I've never updated the hboot when flashing firmware updates. I'm just wondering if I should bother updating my hboot, or just leave well enough alone. If there is a preferred hboot version I'd like to flash it.

Thanks guys!

from xda-developers http://ift.tt/1RQP5Es
via IFTTT

galaxy 3 in recovery nothing in cache cant do anything

I recently updated my non root galaxy s3 sph-l710 to the stagefright update or whaTEVR well now its stuck in recovery mode and theres no files or software to update or reinstall from. nothing in cache. i need to reinstall via sd card.
how can i do this. even when i try connect to din on pc doesnt recognize phone.
tried to dl a few roms put on sd and instal but didnt work.
please help

from xda-developers http://ift.tt/1Yj2HIh
via IFTTT

Android 4.3 with Polish language needed

Hello, is there anyone who has original Samsung firmware of android version 4.3? Could be nandroid backup or tar file.

from xda-developers http://ift.tt/1RQP5Eq
via IFTTT

SlimRom 6.0 for Galaxy S6

SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.

Important links:

slimroms.org - The official webpage where you find everything you need to know about SlimRoms.

Downloads - Download the rom for S6 from here.

Kernel Source - The source of your device's kernel.


Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.

Google+

Twitter

Facebook

Thanks!
The entire team who helped with the device tree to make this device get CM. Hats off guys. Really appreciate your hard work.

For dual boot, kindly follow this link.

If you have any other queries, kindly see this link for any issues other users face before posting here.

Working and Not working:

Everything as in CM

/* Supported devices */

Galaxy S6 International (SM-G920F/I, zerofltexx)
Galaxy S6 SK (SM-G920S, zeroflteskt)
Galaxy S6 KT (SM-G920K, zerofltektt)


Disclaimer: SlimRoms are not responsible for any damages to your device.

XDA:DevDB Information
SlimRom 6.0 for Galaxy S6, ROM for the Samsung Galaxy S6

Contributors
a2441918
ROM OS Version: 6.0.x Marshmallow

Version Information
Status: Testing
Current Beta Version: 0.1
Beta Release Date: 2015-12-15

Created 2015-12-16
Last Updated 2015-12-15

from xda-developers http://ift.tt/1Yj2HI9
via IFTTT

hi im using redmi note 2

how to cpu undervolting ?? :)

from xda-developers http://ift.tt/1Yj2HrR
via IFTTT

Help- Official ruu for htc deisre 820 single sim j_15 / a51_ul please

Help- Official ruu for htc deisre 820 single sim j_15 / a51_ul please

i have a problem with installing a new rom .. so i manged to get back to stock and i need an official stock ruu .. so i can get updates

from xda-developers http://ift.tt/1RQP5Eh
via IFTTT

G920P Sprint Galaxy S6

I have searched around a lot but have only found like 2 roms for the Sprint version. I'm just curious why and if there is anything I can do to get a non-Sprint version to work.

Thanks

from xda-developers http://ift.tt/1Yj2HrJ
via IFTTT

Firmware for Calyx M and Cowon Plenue

I have downloaded firmware for the Calyx M high Res Android DAP and the Cowon Plenue. My previous post asked the question, Can someone build a ROM disabling the phone and lte side of our beloved s3 i747 completely eliminating the apps supporting them and the sim for extended battery life. Unfortunately all I received was the usual banter about it wouldn't be a phone any more. Well that is the point to my quarry. Alas I have received nothing else on the matter. I have an S3 and S4 and would like someone to build a ROM for them out of either of these 2 firmware's. These were free to download and nothing was stated to be required to use or not. Anyone up for the challenge will get an attaboy and if you live in South Florida, A case of a beer of your choice and a good ol' southern steak dinner. If something else is required for one to work on it?, just email me at jsh.roberts1@gmail.com and I'm sure we can work something out. I know we cant make coal into a diamond or a standard dac into a high res device but I sure would love for us to be able use these for disconected devices with a lot of life left in them. Thank you for your time. God Bless

from xda-developers http://ift.tt/1RQP82T
via IFTTT

Samsung Pay & Root?

Are there any rooted ROMs out there that support Samsung Pay or is it currently a choice of one or the other? I'm currently on a stock OE2 (5.0.2) with root and flashfire. I don't care whether the ROM is 5.0.2 or 5.1, my main goal is to get Samsung Pay working.

Thanks,
Nick

from xda-developers http://ift.tt/1Yj2JQs
via IFTTT

[Game][2.2+]Jelly Block Story

Hey, introduce a casual game to you guys.
Jelly Block Story Please check it out and have fun with it.

Tap the Jelly block, they will be crushed, and if they are near to the clod, the clod will be cleared too.
The goal is to dig the soil to gain the jewels or high score.
You can choose different difficuty, enjoy the fun of digging!

If you are looking for casual puzzle games, you can always come to me.:)

from xda-developers http://ift.tt/1Yj2JQn
via IFTTT

Screen Rotates 180° Opposite Direction

Hi, my gs4 (at&t) just recently started rotating the wrong way. When I try to watch netflix, the picture is upside-down, and when I flip the phone to try to see the picture, it flips upside down again. Pretty much everything I do on the thing is flipped by 180°. I've scavenged the internet for fixes but found nothing that worked. I tried all of the re-calibration apps and nothing! One thread said the kernel was bad and flashing one called ktoons(probably didn't spell it right, don't really remember). I bought the phone used and it was already rooted and stuck on 4.4.2 kitkat firmware. I followed this thread http://ift.tt/1b1htCe and upgraded to 5.0.1 lollipop using flashfire and odin. Even after upgrading the rotation is completely backwards. I don't believe the Gyro/accelerometer is bad because it still rotates but just backwards. If you have any information on flashing stock kernel let me know!

Vid to show the rotation in action... https://www.youtube.com/watch?featur...2M&app=desktop

-Thanks!

from xda-developers http://ift.tt/225MZ8e
via IFTTT

My friend makes emulate internal.

My friend made integration "/sdcard" to "/data" on cm 11 bigpart.
Here is picture.
Orignal storage's Total space is 2.90G.
But he made storage's Total space is 10.55G.

from xda-developers http://ift.tt/1O1o0s3
via IFTTT

Music app integration with spotify

I know spotify has an integration with music app, the music app even has a direct link to spotify app. so what does it changue, its the same thing as opening spotify in app drawer so whats the real integration? or service as music app calls it

wrong forum, please mods can you move the threat to Q&A or delete it

from xda-developers http://ift.tt/1lKwDRX
via IFTTT

Disable the "data limit warning?"

Anyone have any idea how to disable the data usage warning? I'm aware that I can just set the limit to a ridiculous amount and it will stop going off, but that's not what I'm looking for. I guess I'm just easily annoyed by the fact that there is no setting to turn this off. You can uncheck the box for "set data limit" but that still doesn't get rid of the warning. Any ideas or help is greatly appreciated.

from xda-developers http://ift.tt/1O1o0bI
via IFTTT

Just unlocked and rooted, computer won't detect device for MTP

Unlocked bootload
Rooted phone
Installed Chroma
But now my computer won't detect the phone whatsoever. I've uninstalled the drivers multiple times now. Any help?


Edit: Did research and found this:

http://ift.tt/1O1o0bE
This explains what is going on in much more detail.

from xda-developers http://ift.tt/1lKwDRR
via IFTTT

Really weird problem, Ghost clicks on screen, i can do nothing!

Hi Xda family,

I have note 4 , and today just immediately for no reason its started to open google search page, then shutting it down, when try to read whatsapp message its goes back to home page and starts open google, i cant look ,check, read, anything, its like ghost touching to my phone,-and its really fast-, i have no control on the phone, if someone calls i can reply, there is no water damage, no dropping down, i haven't seen anything like that before.

i can't lock phone from power button,if i am lucky i can lock it but then screen starting to turn on and turn off, i made cache cleaning, i dont want to format because i have to do back up some data, no new apk's the last apk i install like 2 months ago....


any ideas?

from xda-developers http://ift.tt/1m2WOTi
via IFTTT

[Q] Multi-User access app permission?

Howdy, I am wondering is there any setting that I wanted allow 2nd account access the app. I mean Owner and 2nd account under multi-user which is I wanted the Owner account allows 2nd account access my app to run.

E.g. I work for Amazon and the app installed under Owner account when I created 2nd account then it seems cannot see (Owner account) Amazon app on 2nd account. How do I allow Owner's Amazon app to 2nd account access. Similar App Share something.

Anyone know how fix this issue?

from xda-developers http://ift.tt/1m2WMux
via IFTTT

Heeeellp Samsung Galaxy tab 2 10.0 stuck on Samsung screen

Soooo I was in my setup and I think I accidentally deleted maybe some kind of cache file. i dont remember what it was. now my tablet comes up to only the samsung screen. i tried doing the hard reboot and go back to factory settings...the power button with the volume button and that didnt work. what do i do now:crying:

from xda-developers http://ift.tt/1lKswoW
via IFTTT

Resurrection Remix v5.6.0

Resurrection Remix a ROM that has been based on CyanogenMod, SlimROM, OmniROM and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device!

Many things that in previous versions were tweaked with mods, are now included by default in the ROM. Enjoy!

Be sure to have a backup handy in case anything goes horribly wrong..

Downloads:
RR v5.6.0

Installation:
Wipe System, Data, Cache, Dalvik Cache
Install ROM zip
Install GAPPS, (HIGHLY EXPERIMENTAL, MAY CAUSE BOOTLOOPS AND RANDOM FREQUENT REBOOTS)
Reboot, and hope for the best!

Updating:
Install new ROM zip
Reboot

If there is a major error, don't just complain in broken english, provide a log, info on any other mods you use etc.

XDA:DevDB Information
Resurrection Remix, ROM for the Moto G 2015

Contributors
boswelja, Alberto97
Source Code: http://ift.tt/17rpr4U

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod

Version Information
Status: Alpha

Created 2015-12-15
Last Updated 2015-12-14

from xda-developers http://ift.tt/1m2WOTe
via IFTTT

SCH-I605 Bricked after Clockwork Recovery installed

Hi,
I've been having some trouble restoring my SCH-I605 to functionality after a nice surprise bricking yesterday.
-------------------------------------------------------------------------------------------------------------------
History of Incident:
-------------------------------------------------------------------------------------------------------------------

A few months back I managed to get a successful on my Note 2 after quite a bit of work. Everything was great, and I managed to do all of the modifications I wanted on the stock firmware.

Last night I decided it would be a good idea to make a backup of my current setup in preparation for potential tinkering. I installed Clockworkmod's Rom Manager and Recovery apps. In one of them I clicked something like "Fix Permissions" which requested root access and completed successfully. Following this, the phone requested a restart.

Post restart, I received the standard "verizon has ruined your day" message as follows: "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help."

-------------------------------------------------------------------------------------------------------------------
I researched the topic and found this thread:
http://ift.tt/1m2WJiC

I have tried each of the firmware downloads including the alternates here, along with a variety of others from similar threads claiming to be stock images or stock rooted.
-------------------------------------------------------------------------------------------------------------------
Throughout this process I have managed to get the ODIN Mode Prompt to read:
-------------------------------------------------------------------------------------------------------------------

ODIN MODE
PRODUCT NAME: SCH-I605
CURRENT BINARY: CUSTOM
CURRENT STATUS: CUSTOM
RP SWREV: A3

And

ODIN MODE
PRODUCT NAME: SCH-I605
CURRENT BINARY: SAMSUNG OFFICIAL
CURRENT STATUS: CUSTOM
RP SWREV: A3
-------------------------------------------------------------------------------------------------------------------
Typical failures during and post flash included:
-------------------------------------------------------------------------------------------------------------------
SW REV. CHECK FAIL. DEVICE: 3 BINARY 2

ODIN v3.07 Readout
...
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

-------------------------------------------------------------------------------------------------------------------

SW REV. Invalid magic string.

ODIN v3.07 Readout

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.bin
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

-------------------------------------------------------------------------------------------------------------------
The second error yields the interesting result of changing the Binary from CUSTOM to SAMSUNG OFFICIAL and replaces the verizon message with the following:

"Firmware upgrade encountered an issue . Please select recovery mode in Kies & try again."

Kies will not connect to the device in this state or ODIN mode, but it does try.

When the Verizon message is present, the usb connection has no activity and thus yields no connection in Kies.

-------------------------------------------------------------------------------------------------------------------
I have attempted making some other .tars with the TAR_MD5_PACKAGER but these pacakges yielded similar results. I can remove the sboot.bin file from the package and get it to install, but the same verizon message comes up. I have tried on multiple ODIN versions and two computers with no change in results.

Any thoughts on what to do now? I have included all the information I think is pertinent. If you need more I can provide it.

Thanks,

Donkey545

from xda-developers http://ift.tt/1lKsu0l
via IFTTT

Can Android output 5.1 surround sound to a receiver? How?

I have a phone with Snapdragon 810, which brags "supports DSP" and other high quality audio options (supposedly), the LeTV x900 if its necessary to know (which gsminsider reports has LeTV's ESS exclusive custom DAC and DCDC + LDO two power supply design, if it matters). So the question is:

Is it possible to output true 5.1 or 7.1 sound (DTS, DTS-HD, Atmos, etc) from the phone to a real receiver (Yamaha for example)? I've tried several different version of MHL usb to hdmi cables and they were all only recognized as a stereo source. I'm pretty sure I can't use the 3.5mm jack because it would also only use 2 channels, and bluetooth wold compress the audio. Is there any true options for someone who wants to listen to 3d sound sources (like a bluray mkv put on the phone) on a real home theater receiver? Any feedback would be appreciated. :confused:

from xda-developers http://ift.tt/1m2WMei
via IFTTT

Lollipop interruptions help

I have my phone set to all interruptions but yet when screen is off, I don't get my notifications for new messages. Did some looking around but can't find a solution. I'm using an LG transpyre

from xda-developers http://ift.tt/1lKsu0a
via IFTTT

Really weird error with T-mobile s6 edge bad firmware?

So...
I was trying to factory reset my wife's s6 edge but after trying to do it from the menu the phone only turned off and after turning it on again the phone wasn't back to factory settings.

I tried using the key combination before turning it on but the screen flashed and it seemed that the phone stayed off. After several tries I started thinking the phone was actually in recovery mode but the screen wouldn't display it.
I checked a video and pressed the correct keys to factory reset it (four times down, power, seven times down power) the whole time the phone seemed to be off. But after pressing those keys the factory reset was succesful.

Now my wife can use the phone. But recovery mode is still broken and still shows noting on the screen.

Any ideas of what I can do to get it working again? This is the first time I had an s6 on my hands so I'm not sure of how to flash it or anything.

Hope someone can help

Thanks a lot :)

from xda-developers http://ift.tt/1m2WJiA
via IFTTT

Shield K1 - Charging slower than normal, no indicator

I have the new Shield K1, and it worked great for a few weeks.

Lately, my shield isn't charging as fast as it used too, and when it's plugged it, it doesn't show the charging icon in the status bar. I've tried dozens of cables and adaptors, none of them had any effect. The tablet still charges, but very slowly. OTG accessories still work fine.

When I first got my shield, it charged super fast (using my nexus 7 2012 charger), but now none of my 5v2a chargers work.

A point of interest, I have a portable battery pack that also used to charge my tablet fine. It used to fully discharge in about 4-5 hours with my tablet, now it takes about 14-15 hours, does that mean my tablet is not drawing as much power as it needs?

Shield Tablet K1 / 5.1.1 - rooted / TWRP - multirom

from xda-developers http://ift.tt/1lKsu08
via IFTTT

ALE-L04 b131 (V100R001C578B131) cannot upgrade to lollipop 5.1

I just got a Huawei P8lite ALE-L04 b131 (V100R001C578B131) and i can't upgrade to android lollipop 5.1
I have tried for hours to upgrade my phone the right way :
- downloading the 2 packs
- extracted them
- extracted the "kitkat to lollipop" pack into dload on a free sandisk 32gb sd card
- held volume +/- and power button
- But "Software install failed" ... I couldn't even get to the second part ...

It just seem that the b131 can't upgrade to lollipop 5.1
I'm not the only one who has this problem : Here's other people with the same problem on the Huawei web site forum :
community(.)gethuawei(.)com/devices/p8_lite/f/52/t/2713
Has anyone else gotten this problem? Does anybody know a way that I could try to upgrade to 5.1?
I really want to upgrade to 5.1, I don't want to be stuck on 4.4. My last phone (Moto g) at least had lollipop, now im regressing :(

from xda-developers http://ift.tt/1m2WMee
via IFTTT

Unofficial builds of arter97 CM 13 for S6

I DID NOT DEVELOP THIS ROM! ALL CREDIT BELONGS TO THE DEVS HERE
http://ift.tt/1NqsetP

I will be posting the latest builds of CM 13 for the S6, straight from the source. I will try to update them daily.
This is just for people who want to test the latest features, these are in no way meant to be used as daily drivers. At least not yet.
Do not donate to me, all credit goes to the amazing developers @arter97 @tdcfpp @sktjdgns1189 who without we would have none of this.
Visit there thread for development news and discussion.
http://ift.tt/1NqsetP

NOTE
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.

I REPEAT I DO NOT TAKE CREDIT FOR THIS!

XDA:DevDB Information
Unofficial builds of arter97 CM 13 for S6, ROM for the Samsung Galaxy S6

Contributors
arter97, sktjdgns1189, tdcfpp
Source Code: http://ift.tt/1NNSXEt

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod 13

Version Information
Status: Testing

Created 2015-12-15
Last Updated 2015-12-14

from xda-developers http://ift.tt/1lKswoM
via IFTTT

Converted phone to developer edition to get updates, no Marshmallow yet?

I did the procedure to get lollipop early. It worked fine. Now I am seeing that Marshmallow is supposed to be out for the M8 dev and unlocked editions, however I get nothing in system updates.
HBoot version is 3.19.0.0000, if that means anything. I'm on version 5.0.1 of Android. I noticed the HTC SDK version says "Unknown", not sure if that would be a cause or not though. I don't currently have the android SDK tools installed on this computer so I can't check the other stuff, but I'm positive the phone is converted to dev edition because I was very thorough when I did it.

Is there any reason my phone hasn't received it yet? I'm finding threads from Dec 2nd that state the update has been released.

from xda-developers http://ift.tt/1m2WJiy
via IFTTT

Check encryption?

I'm on PureNexus 6.0 + ExKernel, I check security and it says "Encrypt Phone" (which to me seems like its not encrypted, but under it, it it says "Encrypted"

from xda-developers http://ift.tt/1lKstJK
via IFTTT

Root for Samsung Grand Prime SM-G530AZ Lollipop 5.1.1

Hello,
I have searched all of over the internet for my phones root with no success whatsoever.
- Kingroot does work on the phone but when I reboot my phone it looks up my bootloader and tells me that I have flashed an unauthorised rom and that I should contact cricket. I then had to flash the stock rom with kies.
- I have tried to flash all sorts of recoveries including TWRP and CWM recoveries. It just gives me a fail and on my phone it says "Secure Check Fail: Recovery".
Please help make a root for my phone.
Thank you in advance:fingers-crossed::o

from xda-developers http://ift.tt/1m2WMea
via IFTTT

Cases that are wireless charging compatible

Merry Christmas everyone I got a Nexus 6 today as an early gift to celebrate Christmas and I love it. Are there any cases or charging pads that are powerful enough to be able to charge wirelessly with the case on?

What cases do you guys use? Also, I am a huge Buffalo Bills fan (they let me down on Sunday :() and are there any good custom cases that I can design the Bills logo on?

from xda-developers http://ift.tt/1YgBhmk
via IFTTT

Software Update with a different Sim Card?

Hello everyone,

I bought an AT&T 64 GB S6 edge plus and got it unlocked while in Canada by contacting them. The problem is, I have not gotten a single update from them since I got the phone. Whenever I check for an update, it says that the software is up to date which is not true because when you go their website, they had 3 updates since september, one of them being for the Gear VR, and I got none of those. Is there a way to get my phone updated without going to US?

Thanks

from xda-developers http://ift.tt/1NtSzY9
via IFTTT

Add Navigation Bar (Soft Key)

Plz help me,
How to add navigation bar means soft keykey in stock touchwiz rom (grand 2)

from xda-developers http://ift.tt/1I5SJbx
via IFTTT

Nexus 5 doesn't wake up from Deepsleep

Hi everyone!

I installed CM12 on my Nexus 5 two month ago and it works fine. But I have the problem that it doesn't react when I press the powerbutton to wake it up from deepsleep mode.
Then I could only reboot it.
I changed the "network type" in the settings to "3G" because my provider only supports it and I thought it could solve my problem.

But it also hangs up the phone anymore....

I adapted the settings of the phone in the following way:

- Installed "Apex Launcher" as the default one
- Installed Klear Kat CM12 as Theme
- Additional Apps are: Greenify and SD Maid

I just tried the following steps to fix the problem:

1 . Installed another Launcher instead of "Apex Launcher" ---> I had the problem anymore with the other Launcher

2. Installed Open Gapps "nano" instead of "micro" ---> it ran without any crashes of the phone for a period of time. But now I have the problem again....

3. I wiped "cache" and "dalvik cache" again in TWRP --> System was clean and ran for a while. But after a period of time the problam "came back"

I have no idea anymore. It's suspect that I only have the problem when I'm on a move.
When I'm at home in my Wifi I doesn't have any problems with the phone to wake it up from deepsleep.

Lastly I installed CM13 and had done an Fullwipe before... But I've the problem anymore :(....

I've the feeling that the phone looses it's reception and then the Launcher hangs and can't get up of his own....

I hope someone of you could help me with my problem and give any good ideas ;) :)!

Thanks alot, matze24

from xda-developers http://ift.tt/1NtSzY7
via IFTTT

Unable to enter into recovery mode

Hi all.
My htc one e8 dual running android 5.0.2 indian stock version.
when I try to enter in recovery mode,
It is going into bootloop.
After sometime it reboots normally.
How do I enter into recovery mode?
Thanks in advance.

from xda-developers http://ift.tt/1I5SJbv
via IFTTT

Google Street View 2.0 on fire phone

Hello,

I was wondering if anyone out there can try to see if they are able to get the new street view app from Google working on their fire. For some reason the Google app store link will only provide you with version 1.8, but I need 2.0+ to use with Google cardboard. I've tried to install the apk from several different sites after the app store wouldn't provide me with 2.0, but I get parse errors.

Any help would be greatly appreciated, trying to get this set up to use in class.

Sent from my SD4930UR using XDA Free mobile app

from xda-developers http://ift.tt/1NtSDqF
via IFTTT

New chromecast value over old

Curious if any one with the 2015 chromecast can speak to the advantages over the old for stability.

My old chromecast works fine for most things, but crashes after about 40-50photos in a Photos slideshow. It also chugs a lot playing some chromecast games (e.g. Game of Life Big Screen Edition).

Any one know if these are a factor of the Chromecast or the phone broadcasting to it? I'm tempted to upgrade during the $20 promotional credit, but don't want to waste $15 if it's for a lateral move.

from xda-developers http://ift.tt/1I5SJbt
via IFTTT

Câmera problems!

My Moto G 2015 xt1543 have a problem with the two cameras, out of nowhere they stop working with the error message about restarting the camera and only return to work when you want. This disappointed me a lot on the device, I have done reset, cache cleaning, software update and nothing. Has no solution it?

Error screen shot:

from xda-developers http://ift.tt/1NtSDaj
via IFTTT

[request] mbm c-i 5.0 (don't try to back from android m to kk)

Hello Everybody

Sorry for my terrible english
Hi im locking for someone who knows anything about the MBM C-I 5.0, this MBM is so important for our hardbrickeds moto G, If someone knows anything about the solution of the hardbrick of the bootloader 41.18, please leave a commet, we need help, Motorola doesn't responds the asks of the community and this problem had been for a long time.

Thanks a Lot :D

from xda-developers http://ift.tt/1I5SJbl
via IFTTT

Where are the ASOP or custom roms?

Is there any developers out there than can build asop or custom? phone feels dead on this and at Sony.
another note what apps have people disabled safely?

from xda-developers http://ift.tt/1NtSzHJ
via IFTTT

Cyanogenmod / AOSP

ok so now we have root, and custom recovery, who has a build environment already active and wants to start porting?
Xiaomi Redmi Note2 has Helio X10, ans AOSP ported already...
Im setting up a linux VM as we speak, but I dont have much experience compiling ...
Anyone with helpful hints/pointers/suggestions?

from xda-developers http://ift.tt/1NtSCTR
via IFTTT

Got rebranded android device - Need to figure out if there is a custom ROM I can load

Fair warning - I'm an android noob.

I'm have a rebranded android phone and I'm trying to find alternate ROM's for it.

The phone has the following specs:
Brand: AG Mobile
Model: AG Chrome Swift
Operating System: Android 4.4.2
Display 4.5" FWVGA
Memory 4G+512MB
CPU 1.2G Dualcore
Manufacturer refuses to release their ROM's, updates are non-existent. I'm hoping this is simply a re-branded HTC or something similar that I could an alternate ROM on.

When I used the APK Installer detector app it picked it up as:
Manufacturer: HTC
Description: YunOS ACB Interface

Any assistance to figure this out will be greatly appreciated.

from xda-developers http://ift.tt/1I5SIUZ
via IFTTT

Phone getting hot, slow and annoying

Since I bought this Xperia model, I have had so many problems with it!

The first thing I noticed was that there were a delay in the whole incall ui (took about 5-7 seconds to start a call after pressing "call" button) this was really annoying and I thought that a little software update would solve it, but it didn't!

The other thing is that the phone gets hot very quick even if I'm not using it!

Last thing is... Before this phone, I had, Xperia Z, then Z1, then Z2, then Z3 and now Z5P. And I will really recommend from my own point of view that all those who has the Z3, please don't get the Z5P! (MY OPINION) I really regret that I sold my old Z3 for this annoying part of incomplete technology from Sony. I really hope that the the Z6-Series are going to fix all these problems and get EVEN better!

Btw, I've also got the UCH10 Quick Charger, and since SONY claims that Z5P supports Qualcomm QC2.0 I was hoping that it'll charge my device a lot faster.. But you know what?? It DOES NOT!

THIS IS NOT A RANT ON SONY ETC.. I'M JUST TELLING MY OWN OPINION TO LET OTHER PEOPLE KNOW OR LET THEM SHARE THEIR OWN STORY WITH ME.

(Sorry for my weak English)

from xda-developers http://ift.tt/1YbD9SB
via IFTTT

G920TUVS3DOJC_G920TTMB3DOJC_G920TUVS3DOJC_HOME.tar

G920TUVS3DOJC_G920TTMB3DOJC_G920TUVS3DOJC_HOME.tar

from xda-developers http://ift.tt/1NmbiXI
via IFTTT

Touchscreen problem after upgrading to latest TWRP 2870

I had been running rooted rom (Darth Stalked) 5.0.1, COD6... for months, no problems. I had TWRP 2.8.4.0 installed... So today I downloaded TWRP 2870 from the official web site, and ACCIDENTALLY installed the one for NOTE 4 EDGE (and I have a regular NOTE 4 SM-910T)

So afterwards I realized all the margins for the touchscreen were off, I would have to touch a little HIGHER UP on the screen to hit the button

1 2 3
4 5 6
7 8 9

as an example, think of having to press between the 3 and 6 to actually press 9.

Well, the stylus (s-pen) still seemed to work, so I was able to correctly navigate back to twrp site, download 2870 for note 4 t-mobile (the one I needed). but the touchscreen is still messed up (still not touching where I touch with my finger, but the s-pen works and does hit where it touhces)

I restored a nandroid backup, no change
I factory reset, no change
I reflashed twrp 2840, no change
I reflashed twrp 2870, no change
I wiped cache and dalvik, no change

So, trying to press my finger on the touchscreen registers too high or innaccurate, but the s-pen seems to work. THIS ALL STARTED AFTER I MISTAKENLY INSTALLED THE NOTE 4 EDGE TWRP 2870 and I can't figure out how to UNDO whatever it did.

I am still on COD6, have TWRP 2870 installed, I reverted back to an older nandroid I made with TWRP from about 4-5 months ago, but the touchscreen is still not accurately activating where I press with my finger... PLEASE HELP ME.

from xda-developers http://ift.tt/1NmbjLf
via IFTTT

qpnp-smbcharger-ffffffc00ea20400

Subject of this thread is listed as a major kernel wake lock at times for me. Anyone know exactly what that is?

from xda-developers http://ift.tt/1YbD9Cj
via IFTTT

Unable to Freeze Google App on Android MM

Hi. I always disabled (freeze) the Google App on my phone. I don't use Google now, and hate the battery usage of it.. But, on Android MM (CM13) I get into bootloader when I freeze or uninstall the Google Arm app...

Is there a way to get rid of it? What changed in MM?

Sent from my SM-G900M using Tapatalk

from xda-developers http://ift.tt/1NmbiHc
via IFTTT

I'm due for an upgrade

I'm on tmobile and Currently have the Note 4. No complaints but I am due for an upgrade on Jump. Any suggestions or should I keep waiting?

from xda-developers http://ift.tt/1YbDbtT
via IFTTT

Kernels other than Baybutch's

Does anyone know of any other kernels besides stock and baybutch's?

Thanks,

Mike

from xda-developers http://ift.tt/1Nmbgz6
via IFTTT

Kitchen Sale Aberdeen Area UK

Kitchen Sale Aberdeen Area UK. Thirty Ex Display Kitchens To Clear. w*w*w e-x-d-i-s-p-l-a-y-k-i-t-c-h-e-n-s-1 c*o u*k £ 595 Each with appliances.Tel 01616-694786

**Kitchen Sale Aberdeen Area UK**

from xda-developers http://ift.tt/1YbDbtR
via IFTTT

ZD551KL (Zenfone Selfie) Unlock Bootloader App

Asus release app to unlock bootloader, required V1.14.40.695 or latest version firmware

http://ift.tt/1m2O67s

http://ift.tt/1m2O67y

from xda-developers http://ift.tt/1NQicpK
via IFTTT

[HELP] Need firmware acer liquid z220

Yesterday I did the firt update with my Acer Liquid Z220, the system always remind me that i can update the version and finaly i did it but an error occured during instalation and since my phone doesn't boot.

from xda-developers http://ift.tt/1m2O2Vn
via IFTTT

Trouble with my Lenovo K3 Note... Can ANYONE help me? Pleeease! Thanks in advance!

Hello, all! I am new to the site and have taken a few minutes to look around a little, and I must say... I'm super excited to get to interact with you all! I love learning new things and meeting new people who have some intelligence about them. I love phones [Android, of course!], and just about anything technical, however, I am new to all of the developers stuff but sooo looking forward to learning everything! I'm a quick learner and can usually so something after seeing it once, or being explained something once. Anyway, I'm sure you all are thinking "Get to the issue, woman!" (then again, you're probably not even thinking that lol). I'm here hoping and praying that I can get somewhere with my Lenovo K3 Note. I recently bought this phone form a guy who had it for about a month until his company provided him with a company phone, therefore he didn't need t any longer. I was stoked about getting the phone, it really looked like an awesome phone! Well, the guy I bought the phone from is obviously a tech guy as well because he was rooted the phone and put a stock ROM on the phone (I think I said that right?). I am with Straight Talk for my service, and while I've finally got my text message to work, no matter what I do with the APN settings (on a T-Mobile SIM), I'm not getting any internet or MMS. Can anyone help me, please?! I am sooo lost right now, and it's been two days that I've been working on this phone, hoping I can get it to work. I really, REALLY like this phone, and don't want to have to get another one. If anyone could please help me, I would be forever indebted! ;) Seriously, I would be so grateful for any/all help! Thanks so much in advance, everyone!

from xda-developers http://ift.tt/1m2NZZB
via IFTTT

Need Your Help Quick

ok guys so i rooted my HTC One M7 AT&T and i had all the fun with it but it is time to unroot it and to relock the bootloader so i can return back to stock. So i ve been searching here to return to stock and i did all of those things and i even backed up the phone and everything but i got stuck at the fastboot menu and i cant get out of that it keeps returning to it when i reboot it ( and i cannot choose the backup because it deleted it ). i am trying to fix this for the past 2 hours and no effect. PLEASE HELP :( i really need it

from xda-developers http://ift.tt/1NQib4Y
via IFTTT

DSP Manager or any good eq apps for the venice?

Hello, I own a priv and I love it. However, I miss the loud bass from my music that I had on my nexus 4 with DSP manager. Is it possible to have something like that with the blackberry?

from xda-developers http://ift.tt/1m2NZcg
via IFTTT

Porting Lg v10 Apps to LG G3

Hi Guys, as i comment i will try to port the apps from the new LG v10

I have Fulmics 2.1 so it will work in all variants.

This is the beggining so i will start, i will put the links and how to install the app, i will update the post everyday with full working apps.

1.- V10 LG Home V4.51.14
http://ift.tt/1m2O1Ro
Instructions: Unzip it, you should get one folder with the name LG Home, you need to copy it to the Folder /system/priv-app, but you will already have one with that name, so you should rename the folder LG Home in the system/priv-app to LG Home.old and now you should move the unziped folder to System/priv-app and change the permissions for the APP and the Lib to 644 or rw_r__r__. Reboot, and you should get a FC, pull down quickly the status bar and go to Settings/General/Applications/All and search for LG Home select it and Clear Cache and Data, and now should work without trouble.



Help Me with a Little Donation To My Paypal Account
keki92@gmail.com
Thanks.:good:

from xda-developers http://ift.tt/1NQiaOy
via IFTTT

Boost Moto G. Need assistance

I'm not quite sure this is the proper area for this post I'm sorry. Feel free to move it.

I bought a used Moro G the person claimed it was for sprint and I was in a rush and didn't give it a good enough look when I bought it. Well come to find out it's BOOST. Now I'm out the money and still need a phone.

Is it possible to flash this phone from boost to sprint? And if so can anyone direct me to and possible free software that does this? I've been on Google for a couple of hours and just keep coming up with a bunch of crap that's not helping me at all.

Thank you for the assistance!

from xda-developers http://ift.tt/1m2O1Rb
via IFTTT

[ROM][molly][6.0.1]★ Pure Nexus ★[12/14/15] ADT-1

The Pure Nexus Project



We are not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.

"This is a user friendly thread. All feature requests will be heard and considered. I am not against anything that doesn't stray too far away from the original idea of the ROM! Helping one another is also encouraged! Please be respectful and you will always be treated the same way, we are all here for a good experience."



The Pure Nexus Project aims to bring stability and features to your Nexus device, while keeping Google's vision in line and not straying too far away from that. If you are looking for a stable ROM with true tested features and minimal bugs, then this is the place to be.







Code:

Code:

---

-General
*Based on AOSP Android 6.0.1_r3
*Advanced Reboot menu enabled by default
*MTP & ADB enabled by default
*Bluetooth pairing after reboot (doesn't work on stock)
*LED Control (via kernel settings, control via app coming soon)
*Bluetooth Pairing via Rear Button
*Additional information added to the About menu in Settings
*Overscan adjustment option added to Settings
*Added AOSP Browser with customizations (Credit CyanogenMod Project)
*Added AppDrawer to allow viewing sideloaded non-LeanBack apps
*Fixed force close when uninstalling apps from Settings
*Added native kernel support for EXFAT and NTFS USB auto mount
*Added ADB over network to developer options
*Added option to Settings to reset the default launcher
*Forced animations to .5x as google's code is broken in Developer Options
*Pre-rooted with SuperSU 2.52
*SELinux Enforcing
*Busybox
*Init.d support
*Addon.d support
*Google sounds from factory image not the horrible AOSP ones
*Show apps being optimized during initial boot
*Bug fix's and stability improvements
*Removed googles bug report option
*Removed googles SystemUpdate option
*Removed googles legal information

-PureNexus Customizer
*Custom LeanBack UI Wallpaper
*Adjusted default layout of installed apps to move most used apps (Netflix, Hulu, etc) to the beginning of the My Apps row
*Custom PureNexus Apps row with one click access to install Kodi
*Added cLock as the default widget for time and weather on the LeanBack Launcher
*Added cLock preferences to the My Settings row
*Modified cLock layout to look better for AndroidTV
*Fixed cLock getting cut off when images were too big

---

Google Doc's Changelog

Code:

---

Flash recovery of choice (fastboot flash recovery ex. "purenexus_molly_recovery-121415.img")
Reboot Bootloader (fastboot reboot bootloader, or unplug and replug while holding the rear button)
After this, short press the rear button once until you see "Recovery Kernel" option then long press the rear button.

Now, if you used TWRP, continue down to Section 2, if you opted for PureNexus Recovery, go to Section 1

Section 1
Once in recovery, plug the Developer USB Cable into your PC,  plug a USB keyboard into the ADT-1's USB port, and use the arrow keys to select the "ADB Sideload" option, then hit enter
Sideload ROM (adb sideload pure_nexus_molly-6.0-201xxxxx.zip) where xxxx is the date of the rom you are flashing
Sideload GApps (adb sideload purenexus-gapps-mm-mr1-arm-leanback-20151211-signed.zip)
Use the arrow keys to select "Wipe Data/Factory Reset" then hit enter (Clears data & cache)
Select reboot now, and hit enter

Section 2
Once in recovery, plug the Developer USB Cable into your PC and move all the files (ROM, GApps, KodiKeymap, etc.) to the device via MTP/adb push, plug a USB Mouse into the ADT-1's USB port
Install the ROM (pure_nexus_molly-6.0-201xxxxx.zip, where xxxx is the date of the rom you are flashing)
Install GApps (purenexus-gapps-mm-mr1-arm-leanback-20151211-signed.zip)
Use the mouse to select "Wipe", then advanced wipe, then check all the following and wipe: system, data, cache, dalvik-cache
Select reboot now

Optional Kodi Keymap Fix
Once booted setup everything including Kodi
Then go back to recovery and sideload/install Kodi Mapping zip file. (ADT-1-kodi-keymap-streaming-fix-signed.zip

---

Rom Builds: http://ift.tt/1m2O1AF

Only Supported GApps (Do not use OpenGApps, or a Full Android GApps package, they will cause crashes): http://ift.tt/1NQiahz -- Credits to @dhacker29

Recoveries:
Note: TWRP is preferred until we get the Rear Button working in PureNexus Recovery
Material TWRP (New TWRP Theme Included, Recommended for now): http://ift.tt/1m2NYVC
TWRP Recovery: http://ift.tt/1NQi8WM
PureNexus Recovery: http://ift.tt/1m2NYFa

Kodi keymap and streaming optimizations: http://ift.tt/1NQiahD -- Credits to @dhacker29

XDA:DevDB Information
[ROM][molly][6.0.1]★ Pure Nexus ★[12/14/15] ADT-1, ROM for the Nexus Player

Contributors
npjohnson, dhacker29, beanstown106, r3pwn, gfunk117, mknrls
Source Code: http://ift.tt/1LEATtF

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0.2 LRX22G
Based On: AOSP

Version Information
Status: Stable
Current Stable Version: 12-14-15
Stable Release Date: 2015-12-14

Created 2015-12-15
Last Updated 2015-12-14

from xda-developers http://ift.tt/1NQiahF
via IFTTT

Visual VM not working

I'm using unlocked Tmobile V10 on AT&T and everything works fine except for Visual VM. I download the apk from an old link on the forum. It's installed fine but when I try to activate it, it just gets stuck at connecting and nothing happens.

Does anyone has any suggestions for fixing this issue?

Sent from my LG-H901 using Tapatalk

from xda-developers http://ift.tt/1NQi8Gg
via IFTTT

Is anyone currently working on a G870A OF2/3 root?

I know this question has been asked a lot around here in the past year, but they all dead end with useless information. So, I'm asking again on the 14th of December 2015; Is there anyone working on a root for the Samsung Galaxy S5 Active (SM-G870A) after the 5.0 ota update. Also, I've seen a lot of answers to the question of weather my device can be downgraded and they've been all over the place. I'm sorry if there is a bit of repetition but there has been too much confusion on this subject and I'm looking for clarification. If I've broken any rules without realizing then please let me know. Thanks.

from xda-developers http://ift.tt/1m2O13K
via IFTTT

HELP! I need to change LTE bands for my LG G4C H525N, i'm in Argentina (Bands 4 / 28)

Hi there,

I'm a newbie here and this is my first post. I bought a chinese LG G4C (sub model H525N) (made for Vodafone, german market) and i'm in Argentina where the LTE frequencies that work (in the whole country) are AWS/Band 4 (1700 / 2100 Mhz) and APT/Band 28 (700 Mhz) but... my cell phone won't work on this! I can use 3G (whichs displays as "H" or "H+" and are good, sometimes... But the main thing to write here is the reason i can access the hidden menu (via 277634#*#) where i can see 15 LTE bands to choose from, but when i select Band 4, Band 28, and many others (as a test mode) i get a "FAIL" message as a response... the ones that i can pick are Band 3, 7, 8 and 20, none of these are good for me, so i was wondering if some cool soul could decrypt the way i can change my settings to get a functional LTE cell phone!

More info you may need from the device:
My cell phone is unlock to use any SIM card, now i'm working with Movistar Arentina.
I have selected as "Net Mode" or whatever (i have my cell phone in spanish language) 2G/3G/4G
According to Movistar Argnetina i have the right APN configuration (Provided by default when i inserted the sim card the first time)
In Hidden Menu: Field Test/Modem Settings/Network Mode i selected "Automatic"
In Hidden Menu: Field Test/Modem Settings/RAT Selection i selected "GSM / WCDMA / LTE auto"

Cheers,


Martín

from xda-developers http://ift.tt/1NQi9KC
via IFTTT

My S4 got random reboots

My S4 is running Lollipop (updated few months ago) stock rom w/o root, and recently I experienced random reboot few time a day, usually when I launch the stock browser / facebook app. The strange thing is that when the phone is restarted, battery drops to few % only.

I've tried to replace a spare battery, the same thing still happen.

Factory reset is the last hope I have, but before I doing this, any other tricks that can help? Battery calibration?
Please help me.......:cowboy::cowboy:

from xda-developers http://ift.tt/1NQi9Kv
via IFTTT

Emoji Request

Some of you may or may have not noticed, but coming from a nexus 5, the emoji's were nice looking. Now that I'm on V10, the emojis are butt ugly. I've attached an image of what I'm talking about. The ones circled in green are what the new ones look like, and the red circled ones are the ones I'd like back. Clicking on them only changes what they look like when selecting them on the keyboard. Not what they look like when placed. Any way I can get them permanently?

Attached Thumbnails

 

from xda-developers http://ift.tt/1Qnzhtc
via IFTTT